Easy installation and uninstallation

APPLICATION AND INSTALLATION CONDITIONS:


Necessary tools:

  • Hammer.
  • Broom.
  • 1 or 2 people can easily install and uninstall the Cocobeach.


INSTALLATION / DIFFERENT PHASES:

Step 1: Leveling the floor

Simply level the sand with a broom and then unroll the mat.

Step 2: Fastening the mat to the floor

Once your mat is unrolled on the floor, anchor the spikes in the eyelets with a hammer.

Special case: Creating a curve

To create a curve, simply overlap two mats and anchor the lower mat with the stake of the upper mat.

Even without an eyelet, the bottom Cocobeach mat will be flexible enough to allow the tip to pass through.

UNINSTALL / STEPS TO FOLLOW:

Step 1: Sweep the mat.

It is recommended to sweep the carpet before rolling it up.

Step 2: Remove the spikes.

The spikes are anchored through eyelets. If the tips are firmly anchored, it may be necessary to use a pair of pliers.


Step 3: Roll up the mat.

Once the mat is completely dry, roll it up and use the carrying strap provided with the mat for handling and storage.

It should not be stored when wet.

MAINTENANCE:

The mat does not require any special maintenance other than minimal cleaning.

It is recommended to shake the Cocobeach mat regularly or use a low pressure water jet to remove sand from its surface.

Specifications

  • Weight per m2: 1,950 Kg
  • Length: On request
  • Width: 1 mtr
  • Thickness: 10 mm
  • Delivery: Rolled
  • Material: Coconut fiber

Maintenance Manual

  • Fresh water washing of the entire equipment on a daily basis.
  • Disassembly and washing of all moving parts and their nuts every 15 days.
  • Grease with multipurpose oil or liquid petroleum jelly or petroleum jelly all bolts and nuts every 15 days.
  • Reassembly of all screws and moving parts.
  • Disassembly of rear wheels and washing of stainless steel axles every 15 days.